|
News Code
1721
Copied
Compability of CO۲ Extinguisher Components
TIN news: Fire-Extinguishers The USCG has issued Marine Safety Alert regarding a recent marine casulaty investigation of a shipboard fire onboard a US flagged vessel in the Hampton Roads Captain of the Port (COTP) zone raised serious concerns with regards to CO2 fire extinguisher servicing. During shipboard fire- fighting operations a crewmember attempted to fight a fire using a 15lb CO2 extinguisher, but the extinguisher failed to properly discharge and only seeped from the neck of the extinguisher. The fire was eventually extinguished by another crewmember using a dry- chemical fire extinguisher.
This marine casualty highlights the importance for fire- fighting servicing agencies to ensure they are using fire extinguishers and components compatible with one another. The use of components incompatible with one another, happened in this case, could have resulted in a much more serious marine incident. To help reduce marine casualties similar to the one described in the alert, the USCG strongly recommends the following measures:
The fire fighting servicing agencies check all CO2 extinguishers during annual fire-fighting equipement servicing onboard contracted vessels and remove any diffusers of the same type and design. These obsolete diffusers should be replaced with new diffusers that are compatible with the standard discharge hoses used in service today.
That fire- fighting servicing agencies, when discharging CO2 fire extinguisgers as a part of periodic servicing, discharge the extinguishers with the discharge hoses conneted to ensure compatibility of all componets and overall functionality of the extinguishers. In this case, doing so would have likely identified the inoperability of the extinguisher years before it was needed to fight a shipboard fire.
That marine employers and vessel operators conduct organizational audits and inspections of CO2 fire extinguishers currently in service and check for obsolete diffusers that may be incompatible with the standard discharge hoses in use today.
This marine casualty highlights the importance for fire- fighting servicing agencies to ensure they are using fire extinguishers and components compatible with one another. The use of components incompatible with one another, happened in this case, could have resulted in a much more serious marine incident. To help reduce marine casualties similar to the one described in the alert, the USCG strongly recommends the following measures:
The fire fighting servicing agencies check all CO2 extinguishers during annual fire-fighting equipement servicing onboard contracted vessels and remove any diffusers of the same type and design. These obsolete diffusers should be replaced with new diffusers that are compatible with the standard discharge hoses used in service today.
That fire- fighting servicing agencies, when discharging CO2 fire extinguisgers as a part of periodic servicing, discharge the extinguishers with the discharge hoses conneted to ensure compatibility of all componets and overall functionality of the extinguishers. In this case, doing so would have likely identified the inoperability of the extinguisher years before it was needed to fight a shipboard fire.
That marine employers and vessel operators conduct organizational audits and inspections of CO2 fire extinguishers currently in service and check for obsolete diffusers that may be incompatible with the standard discharge hoses in use today.