| News Code 63923
Copied

Concerns remain over container weights

Concerns remain over container weights
|
TIN news:         From 1st July next year, SOLAS amendment Chapter VI Regulation 2 will require every freight container loaded aboard a ship to have verification of its gross mass. But just ten months away from this very significant (and necessary) change, it seems clear that the preparations for its implementation are far from complete.
 
The concept seems simple enough, but the fact that nearly half a century after containers started to be carried by sea we are only now on the threshold of this change ought to alert people that implementation internationally (and even nationally) may prove more complex than meets the eye. Last week a technical seminar organised in London by ICHCA International addressed many of these residual and very practical problems.
 
On the face of it, the new requirements seem clear about the fact that it is the shipper’s responsibility to present a container to carriers accompanied by the certificate of Verified Gross Mass. But there still needs to be clarity as to who exactly the “shipper” is. Will the identity of this responsible entity vary dependent upon the terms of shipment? Will the outsourcing of the weighing to a third party confuse the issue? And what might happen if boxes arrive at terminal gates without the necessary VGM? Might issues of demurrage issues arise if boxes are held to await proper documentation? And how far has the international logistics industry advanced as to the certifying and calibration of weighing equipment?
There may be a reasonable expectation that such questions are answerable, but it is clear that many of these matters may give rise to problems around the world as the new system beds in.
 
There are, it seems, plenty of more practical matters to be addressed in the coming months. It is worth remembering, the seminar was told, that it is by no means unusual that an 8000 teu containership can find that there are 2500 tons of unexplained additional weight aboard, with obvious implications for fuel consumption, let alone anything else. There are still plenty of instances of disgraceful overloading – a truck driver in the UK worried about his load found when he took it to a weighbridge, that the 40ft box he was hauling (declared at 30 tons) contained 96 tons! This perhaps illustrates the importance of these matters.
 
How accurate must the weighing be? It is noted that international accuracy standards of weighing are yet to be determined. It is suggested that an accuracy of 1-2% might be appropriate, but will be left to the national administration to determine this. There is still debate about the best means of establishing the weight under the two permitted SOLAS methods and exactly where this ought to be undertaken. Ideally, wherever a container is packed ought to be the proper place, as just as many problems arise on the way to the terminal on road and rail as are found in the terminal itself, or on the sea voyage. But the terminal gate might be a suitable alternative, with terminals earning a useful fee for this service.
 
More questions surround the location and the accuracy of weighbridges and other means of establishing the tare weight. The weight of the vehicle, which varies depending on the amount of fuel aboard is a problem, as is the establishment of an accurate weight if two 20 ft boxes are aboard. Might load cells, which can be incorporated into all forms of lifting device provide a safer and surer method?
 
All of this, bearing in mind the proximity of the implementation date is of growing importance for everyone right across the logistics chain. Systems, accuracy, calibration arrangements, methods and “policing” will have to be established. Something workable has to be devised. The hope was expressed that after the implementation date “common sense” among the various authorities, will prevail.
Send Comment