|
News Code
44515
Copied
First Ever ۳D Printed Jet Engine Unveiled
TIN news: History has been made in Australia where the world’s first printed jet engines have been created.
Produced by researchers at Monash University and their partners at Deakin University and national science agency CSIRO (the Commonwealth Scientific and Industrial Research Organisation), the technology is designed to showcase that jet engines can be manufactured in this way – so won’t enter service as such.
Microturbo (Safran) was also involved in this project, making available a conventional gas turbine engine of the type employed in the Dassault Falcon 20 ‘bizjet’ and other commercial aircraft. The selection of this particular engine occurred because Microturbo allowed it to be studied in-depth, including all its internal components.
Printed Engine First
According to the Monash Centre for Additive Manufacturing’s director, Professor Xinhua Wu, the project that resulted in this printed engine first was, initially, “our chance to prove what we could do. But when we reviewed the plans we realised that the [Microturbo] engine had evolved over years of manufacture. So we took the engine to pieces and scanned the components. Then we printed two copies.”
One of these engines is now being showcased at the Australian International Aerospace & Defence Exposition at Avalon, which opened on 24 February and runs until 1 March. The other is currently exhibited at Microturbo’s (Safran’s) premises in Toulouse, France.
"Xinhua and her Monash team have demonstrated their mastery of additive manufacturing in metal”, said Microturbo (Safran) R&T head, Jean-François Rideau, in Monash University’s 3D printed jet engine press release.
“The partnership with Microturbo (Safran) is a success story that was recognised last year when Safran gave the team its Prize 'Innovation for Product and Technology' for the excellent work carried out in partnership with Microturbo and the University of Birmingham. Monash and [university spin-off firm] AMAERO are already key partners for our new developments and we are keen to have their help in developing new technologies for our future engines.”
Microturbo was established in 1961 and, since then, has delivered some 13,000 power systems to customers around the world.
Known also as additive manufacturing, 3D printing describes the creation of three-dimensional objects using ‘additive processes’, where materials are layered up by computer. In use for some 30 years, the technique has come into its own of late, with some industry analysts predicting it has the potential to lead in the 21st century’s ‘industrial revolution’.
Produced by researchers at Monash University and their partners at Deakin University and national science agency CSIRO (the Commonwealth Scientific and Industrial Research Organisation), the technology is designed to showcase that jet engines can be manufactured in this way – so won’t enter service as such.
Microturbo (Safran) was also involved in this project, making available a conventional gas turbine engine of the type employed in the Dassault Falcon 20 ‘bizjet’ and other commercial aircraft. The selection of this particular engine occurred because Microturbo allowed it to be studied in-depth, including all its internal components.
Printed Engine First
According to the Monash Centre for Additive Manufacturing’s director, Professor Xinhua Wu, the project that resulted in this printed engine first was, initially, “our chance to prove what we could do. But when we reviewed the plans we realised that the [Microturbo] engine had evolved over years of manufacture. So we took the engine to pieces and scanned the components. Then we printed two copies.”
One of these engines is now being showcased at the Australian International Aerospace & Defence Exposition at Avalon, which opened on 24 February and runs until 1 March. The other is currently exhibited at Microturbo’s (Safran’s) premises in Toulouse, France.
"Xinhua and her Monash team have demonstrated their mastery of additive manufacturing in metal”, said Microturbo (Safran) R&T head, Jean-François Rideau, in Monash University’s 3D printed jet engine press release.
“The partnership with Microturbo (Safran) is a success story that was recognised last year when Safran gave the team its Prize 'Innovation for Product and Technology' for the excellent work carried out in partnership with Microturbo and the University of Birmingham. Monash and [university spin-off firm] AMAERO are already key partners for our new developments and we are keen to have their help in developing new technologies for our future engines.”
Microturbo was established in 1961 and, since then, has delivered some 13,000 power systems to customers around the world.
Known also as additive manufacturing, 3D printing describes the creation of three-dimensional objects using ‘additive processes’, where materials are layered up by computer. In use for some 30 years, the technique has come into its own of late, with some industry analysts predicting it has the potential to lead in the 21st century’s ‘industrial revolution’.