|
News Code
31629
Copied
Wind - modelling software promises turbine improvements
TIN news : New technology could help improve the efficiency of wind turbines and the safety of maintenance staff by better predicting wind patterns.
Researchers at Sheffield University have created software that builds a picture of the wind activity – including speed and direction – around a turbine based on just two readings taken with static laser beams.
Existing techniques use similar “lidar” technology but can only provide information about the speed of the wind travelling along the path of the laser beams and are blind to activity in other directions – an issue known as the “Cyclops dilemma”.
‘If you know what the wind looks like, in theory you can significantly reduce the unsteady loads on the turbine,’ said lead researcher Bryn Jones, who worked with colleague Paul Towers on the project.
The system would also benefit offshore turbine construction and maintenance crews, he added. ‘If you can forecast an oncoming gust with a minute or two’s warning that would be significantly valuable because it allows them to work closer to the margins and maximise their time in the ocean environment.’
Lidar systems can calculate the wind speed by measuring how the frequency of laser light changes when it is scattered by the moving air particles.
The Sheffield technology feeds this information into a model of a wind system that can estimate both the speed and direction of the air outside the laser beam area.
And by modelling what is happening in the surrounding area, the technology can predict how gusts of wind will hit the turbine in the immediate future.
By taking repeated measurements, the system can build up enough information to provide an accurate estimation of the wind pattern within a matter of seconds, according to Jones.
The technology combined computational fluid dynamics with control systems, he said. ‘The algorithm relies on a model of the wind that is hideously complicated. It needed significant simplification to put it into a low-cost processor and enable computation in real time.’
The system has so far been tested with synthetic data but will now be used with real data from a Lidar device comprising five laser beams to improve its accuracy.
Researchers at Sheffield University have created software that builds a picture of the wind activity – including speed and direction – around a turbine based on just two readings taken with static laser beams.
Existing techniques use similar “lidar” technology but can only provide information about the speed of the wind travelling along the path of the laser beams and are blind to activity in other directions – an issue known as the “Cyclops dilemma”.
‘If you know what the wind looks like, in theory you can significantly reduce the unsteady loads on the turbine,’ said lead researcher Bryn Jones, who worked with colleague Paul Towers on the project.
The system would also benefit offshore turbine construction and maintenance crews, he added. ‘If you can forecast an oncoming gust with a minute or two’s warning that would be significantly valuable because it allows them to work closer to the margins and maximise their time in the ocean environment.’
Lidar systems can calculate the wind speed by measuring how the frequency of laser light changes when it is scattered by the moving air particles.
The Sheffield technology feeds this information into a model of a wind system that can estimate both the speed and direction of the air outside the laser beam area.
And by modelling what is happening in the surrounding area, the technology can predict how gusts of wind will hit the turbine in the immediate future.
By taking repeated measurements, the system can build up enough information to provide an accurate estimation of the wind pattern within a matter of seconds, according to Jones.
The technology combined computational fluid dynamics with control systems, he said. ‘The algorithm relies on a model of the wind that is hideously complicated. It needed significant simplification to put it into a low-cost processor and enable computation in real time.’
The system has so far been tested with synthetic data but will now be used with real data from a Lidar device comprising five laser beams to improve its accuracy.