|
News Code
113080
Copied
European ANSPs optimise arrival flows to save fuel consumption
TIN news: A consortium of European air navigation service providers (ANSPs) and airlines has optimised several arrival flows to nine airports across Europe to enhance their annual fuel saving.
The optimised flows will be able to reduce fuel consumption by 3,400t every year, thereby reducing an equivalent amount of more than 10,700t of carbon emissions, as calculated by Eurocontrol.
Out of the 33 analysed flows, half have already been permanently implemented, while seven of them are published in the Aeronautical Information Publication (AIP).
A total of 11,467 demonstration flights were conducted and could achieve real fuel savings of 86t, equivalent to a 270t reduction of carbon emissions.
DFS Deutsche Flugsicherung project manager Ilhan Akin said: “The aim was to develop more efficient descent profiles and reduce the environmental impact in busy and complex airspaces and across borders without compromising safety and capacity aspects.”
Co-funded by the Single European Sky ATM Research (SESAR) Joint Undertaking, the optimised decent profiles (ODP) project commenced its work at the end of 2014.
The optimised flows will be able to reduce fuel consumption by 3,400t every year, thereby reducing an equivalent amount of more than 10,700t of carbon emissions, as calculated by Eurocontrol.
Out of the 33 analysed flows, half have already been permanently implemented, while seven of them are published in the Aeronautical Information Publication (AIP).
A total of 11,467 demonstration flights were conducted and could achieve real fuel savings of 86t, equivalent to a 270t reduction of carbon emissions.
DFS Deutsche Flugsicherung project manager Ilhan Akin said: “The aim was to develop more efficient descent profiles and reduce the environmental impact in busy and complex airspaces and across borders without compromising safety and capacity aspects.”
Co-funded by the Single European Sky ATM Research (SESAR) Joint Undertaking, the optimised decent profiles (ODP) project commenced its work at the end of 2014.
"The project has shown that each and every improvement counts. The optimisations generate fuel savings and thus contribute to a more sustainable air transport in Europe."
The project was conducted by German ANSP DFS in collaboration with the ANSPs of France (DSNA), Austria (Austro Control) and Switzerland (skyguide).
The team also included Eurocontrol’s Maastricht Upper Area Control Centre (MUAC).
Akin added: “The project has shown that each and every improvement counts. The optimisations generate fuel savings and thus contribute to a more sustainable air transport in Europe.
“For the implementation of optimised profiles on a broad basis, a framework and standards need be further developed in close partnership with the airline operators.”
The optimum arrival refers to a continuous descent that does not require considerable engine power.
Optimum arrival in highly frequented airspaces, which are shaped by national borders and handover points, is not always possible. However, existing arrival flows can often be improved.
In place of fixed waypoints, precise level windows can be defined and programmed in the flight management system of the airplane.
Vertical flight efficiency can also be enhanced by remaining at cruising altitude for a longer period of time before descending, as fuel consumption is lower at higher levels.
The team also included Eurocontrol’s Maastricht Upper Area Control Centre (MUAC).
Akin added: “The project has shown that each and every improvement counts. The optimisations generate fuel savings and thus contribute to a more sustainable air transport in Europe.
“For the implementation of optimised profiles on a broad basis, a framework and standards need be further developed in close partnership with the airline operators.”
The optimum arrival refers to a continuous descent that does not require considerable engine power.
Optimum arrival in highly frequented airspaces, which are shaped by national borders and handover points, is not always possible. However, existing arrival flows can often be improved.
In place of fixed waypoints, precise level windows can be defined and programmed in the flight management system of the airplane.
Vertical flight efficiency can also be enhanced by remaining at cruising altitude for a longer period of time before descending, as fuel consumption is lower at higher levels.